Free, plain-language help for hearing the TV clearly.

Text size

How to Connect Wireless Headphones to Any TV

Step-by-step instructions for connecting TV headphones by optical cable, headphone jack, RCA or Bluetooth — plus fixes for 'no sound.'

Key takeaways

  • Check the back and sides of your TV for optical (TOSLINK), 3.5 mm headphone, or red/white RCA audio outputs.
  • Optical is the most common connection on modern TVs and usually keeps the TV speakers working.
  • If you get no sound over optical, set the TV's digital audio output to PCM.
  • If your TV speakers go silent when you plug into the headphone jack, look for an audio output setting that allows both.

Most TV listening systems connect in one of four ways. Find the ports on your TV, choose the best match, and follow the steps below. The whole process usually takes about ten minutes.

Step 1: Find your TV's audio outputs

Look on the back and sides of your TV for these labels:

  • Optical / Digital Audio Out / TOSLINK — a small squarish port, often with a hinged door and a faint red light when the TV is on.
  • Headphone — a round 3.5 mm jack, often with a headphone icon.
  • Audio Out (L/R) — red and white RCA jacks. Make sure they say out, not in.
  • Bluetooth — built-in on many smart TVs; check Settings → Sound → Sound Output.

Connecting with an optical cable

  1. Remove the tiny protective caps from both ends of the optical cable.
  2. Plug one end into the TV's optical port until it clicks; plug the other end into the transmitter.
  3. Plug the transmitter into power and place it with a clear view of your seat (for infrared models).
  4. On the TV, open Settings → Sound and set Digital Audio Out (or similar) to PCM.
  5. Choose a sound output that keeps the TV speakers on if others are listening — see TV speakers and headphones at the same time.

Connecting with the headphone jack

  1. Plug the transmitter's 3.5 mm cable into the TV's headphone jack.
  2. Set the TV volume to around the middle; the headset has its own volume control.
  3. If the TV speakers go silent, look in the sound settings for an option such as "Headphone + Speaker," "Headphone mode: Audio Out," or "Variable/Fixed."

Connecting with RCA (red/white) outputs

  1. Use an RCA-to-3.5 mm cable or the cable supplied with your system.
  2. Connect red to red and white to white on the TV's Audio Out jacks.
  3. Check whether the output is "fixed" (constant level) or "variable" (follows TV volume) in the TV menu.

Connecting with Bluetooth

  1. Put the headphones or Bluetooth transmitter in pairing mode.
  2. On the TV, open the Bluetooth or Sound Output menu and select the device.
  3. If voices lag the picture, look for an audio delay or lip-sync setting, or use a low-latency transmitter. See lip-sync delay explained.

If you use a cable box, soundbar or receiver

If a soundbar or receiver is connected to your TV, the TV's optical port may already be in use. Many soundbars and receivers have their own optical or headphone output you can use instead. Some cable boxes also have audio outputs.

Troubleshooting

ProblemTry this
No sound (optical)Set digital audio output to PCM; remove cable caps; reseat the plug.
Hiss or crackle (infrared)Reduce sunlight; move the transmitter for a clear line of sight; charge the headset.
TV speakers stop workingChange the TV's sound output to allow speakers plus external output.
Sound is very quietRaise the TV volume (headphone jack) or check fixed/variable output setting.
Sound lags the pictureUsually Bluetooth; adjust the TV's audio delay or use optical.

Frequently asked questions

Why is there no sound in my TV headphones with an optical cable?

The most common cause is the TV sending a surround format (such as Dolby Digital) the transmitter can't decode. Go to the TV's sound settings and set Digital Audio Out (or Digital Output Format) to PCM. Also check that the cable's protective caps are removed and the plug clicks in.

My TV has no optical or headphone port. What can I do?

If you use a cable box, streaming device or soundbar, it may have an audio output you can use. Otherwise, an HDMI audio extractor can pull sound from an HDMI connection and provide an optical or analog output.

Not sure which option is right for you?

Answer four quick questions and we’ll suggest the TV listening options most likely to help.

Find your option